Solar glass

Detailed Product Description

 Each 1-megawatt solar cell device require 15,000 square meters of textured solar glass,  3,000 MW solar cell device require 45,000,000 square meters of photovoltaic glass per year all over the world , and the annual growth rate is 40%, meanwhile, the greater demands to textured solar glass are new type of thin-film solar cells, textured solar glass plate is plated with nano-thin photovoltaic film after plating it with a transparent conductive film ,then become thin film solar cell components.

  Because of needless of silicon materials, the cost of thin film solar cell is much less than polysilicon Solar cells, and can be the external glass wall of buildings , which get the purpose for lighting and generating , and the annual growth rate is not less than 80% .As the support of thin-film solar cell,  the demands to textured solar glass are up to 100 million sqm each year in the world.

 At present, the mainstream of textured solar glass is tempered textured solar glass with the thickness of 3.2mm, in the wavelength range of spectral response of solar cells (320 ~ 1100nm), light transmission rate is up to 91%. For the infrared light that its wavelength is more than 1200nm  it has excellent transmittance, and the profies are much higher than ordinary glass , the gross profit margin is up to 50%.

Textured solar glass have the excellent performance features of solar light transmittance, physical strength, flatness, low reflectance, low iron content, ect.. It takes advantages of reflection of the pattern to reduce the solar reflection, so the product has a high solar transmittance at any angle incidence. Furthermore, the low iron content of less than 120ppm enables a very low solar absorbance by the glass itself, and on the contrary increase the transmittance. The glass with non-toxic chemical composition comforms to the rigorous environmental requirement of Europe, USA and Japan.

                                                    

Production technology features:

 1. Control the COD value of raw materials and REDOX value fo batch, and then control the ratio of iron content in liquid glass, to ensure textured solar glass with low-iron content and high transmission.

 2. Using the most advanced furnace structure and melting technology in the world, combined with the three-dimensional dynamic mathematical computer simulation of furnace;  greatly increasing of  the liquid glass melting quality soundly meet the solar ultra-white glass melting of the special raw materials based on a high level of international practice and a line of software-based operation, which combined with features of ultra-white glass solar  and reasonable development of fusion Technology system ,

 3. Using the most advanced and mature molding equipment, and introducing RUREX equipment from Germany, then producing textured solar glass with different specifications.

 4. Distributed Computer Control Systems (DCS) control raw materials, furnace, forming. A central control room was set up in the core parts of the product line, as order to achieve short-range and long-range operations & control.To carry out all aspects of distributed control, centralized monitoring and management. Equipment to achieve the parameters of the process of detection, collection, data processing and automatic operation. Programmable logic products using automatic control System (PLC) and set up displays for the operation and management of dynamic display.

     5. Solar energy ultra-clear glass production adopt scientific management and coordination of operations, in order to strengthen the management of detection, meet quantitative indicators and strict control of energy consumption.

Specifications and Properties

1. Thickness: 2.5mm-10mm   standards: 3.2mm

2. Thickness Tolerance: ±0.15 mm

3. Max size: 2250*3500mm

4. Solar Transmittance(3.2mm): ≥91.6%

5. Iron Content: ≤120ppm Fe2O3

6. Poissons Ratio: 0.2

7. Density: 2.5g/cc

8. Youngs Modulus: 73Gpa

9. Tensile Strength: 42 Mpa

10. Hemispherical Emissivity: 0.84

11. Expansion Coefficient: 9.03*10-6/

12. Softening Point: 720

13. Annealing Point: 550

14. Strain Point: 500

Series of solar glass

1.      Textured solar drawing glass

We can offer Textured solar drawing glass with various specifications and patterns, the usual specification and pattern as follow:

Thickness: 2.5mm-10mm

Max size: 2250*3500mm

Pattern: Matt-finished/Matt-finished  Prismatic/Matt-finished

Packed: wooden crate  plywood case

2.      Tempered textured solar glass

After future processing and tempering, textured solar glass obtains stronger,safer, flater and better transmitting proterties. Beside, it can protect solar cell againtes accidental impact and corrosion.

Specifications:

Thickness: 2.8-10mm

Size: 1000*2000mm   1219*1930mm

Packed: wooden crate

Qulitystandards:GB15763.2-2005,AS/NZS2208:1996,EN12150/DIN1249D,ASTM-E-903(891)-96  and so on

3.      Anti-reflective coated textured solar glass

The product is solar glass with anti-reflective coated, before been tempered,which can effectively reduce solar proportion and increase the transmitting properties( incraese 3% , solar transmittance of 3.2mm solar glass can up to 95%) and transforming rate.

Specifications:

Thickness: 2.5mm-10mm   standards: 3.2mm

Max size: 2250*3500mm  1000*2000mm ( after tempering)

Qulitystandards:GB15763.2-2005,AS/NZS2208:1996,EN12150/DIN1249D,ASTM-E-903(891)-96  and so on

Packed: protective film, wooden crate